| |
|
THIN WALL |
HST100 SERIES |
 |
Shrink Ratio: 2 to 1
A flexible, general purpose tubing for use where an adhesive seal is not needed. Conforms well to irregular shapes.
• Insulation and strain relief for wire terminals
• Color-coding of electrical harnesses
• Wire bundling
• Self-extinguish (except clear)
Stocked Colors: Black, Clear, Red, Blue, Green, Yellow & White
Standard Cut Lengths: Bulk, 100’, 25’, 8’, 4’, 12”, 6”
Pre-Shrink ID: 3/64”, 1/16”, 3/32”, 1/8”, 3/16”, 1/4”, 3/8” 1/2”, 3/4”, 1”, 1 1/2”, 2”, 3”, 4” |
FLEXIBLE ADHESIVE-LINED |
HST200 SERIES |
 |
Shrink Ratio: 3 to 1
A flame-retardant tubing (except clear) with an internal layer of thermo-plastic adhesive
which provides a barrier against contaminants. Still highly flexible for conforming to
irregular shapes.
• Environmental protection for electronic components
• Protection of automobile, marine and truck wire splices and harness breakouts
• Adhesive-lining provides a seal against corrosion.
Stocked Colors: Black, Clear, Red
Standard Cut Lengths: 48”, 12”, 6”
Pre-Shrink ID: 1/8”, 3/16”, 1/4”, 3/8”, 1/2”, 3/4”, 1” |
TINTED ADHESIVE-LINED |
HST300 SERIES |
 |
Shrink Ratio: Exceeds 3 to 1
Our tinted, semi-rigid adhesive-lined heat shrink tubing is the clear choice for insulating and color-coding small gauge wire connections. This tubing offers several distinct advantages:
• Tubing is tinted for color-coding, but is also translucent to allow the installer to view the underlying material.
• Wire gauge imprint for ease of wire identification both before and after installation.
• Adhesive-lining provides a barrier against contaminants.
Stocked Colors: Clear, Red, Blue, Yellow
Standard Cut Lengths: 48”, 12”, 6”
Pre-Shrink ID: .115”, .245”, .360” |
SEMI-RIGID ADHESIVE-LINED |
HST400 SERIES |
 |
Shrink Ratio: Exceeds 2 1/2 to 1
A semi-rigid tubing with a co-extruded integral adhesive lining. Provides a tough protective and insulating barrier, highly resistant to penetration by moisture and the attack of chemicals and solvents.
• Easy to remove once installed
• Electrical wire splices, breakouts, connections and solder joints
• End-sealing of electrical cables and rigid tubings
Stocked Colors: Black, Red, Blue, Brown, Gray,
Yellow & White
Standard Cut Lengths: 48”, 12”, 6”
Pre-Shrink ID: 1/8”, 3/16”, 1/4”, 3/8” 1/2”, 3/4”, 1” |
SPECIALTY TUBING: HIGH ADHESIVE FLOW |
HST500 SERIES |
 |
Shrink Ratio: 4 to 1
Both series are made of all weather, polyolefin tubing with a very active adhesive lining.
• Excellent for sealing multiple wires
• Puncture resistant and provides superior strain relief
Stocked Colors: Clear
Standard Cut Lengths: 48”, 12”, 6”
Pre-Shrink ID: .220”, .30”, .35”, .45”, .70 |
SPECIALTY TUBING: HIGH SHRINK RATIO |
HST600 SERIES |
|
Shrink Ratio: Exceeds 5 to 1
Both series are made of all weather, polyolefin tubing with a very active adhesive lining.
• Excellent for sealing multiple wires
• Puncture resistant and provides superior strain relief
Stocked Colors: Black
Standard Cut Lengths: 48”, 12”, 6”
Pre-Shrink ID: .75”, 1.3”, 1.75”, 2.0”, 2.75”, 3.5”, 4.7” |
HEAVY WALL |
HST700, 800 & 850 SERIES |
 |
Shrink Ratio: 3 to 1
A sturdy, heavy wall tubing with excellent insulating, abrasion-resisting, and strain-relieving properties. The thermo-plastic adhesive provides superior environmental protection.
• Battery splices and terminals
• Direct Burial, Underwater environments
• Meets UL486D
• Any connection in harsh conditions
• Adhesive-lining provides a barrier against contaminants
Stocked Colors: Black, Red
Standard Cut Lengths: 48”, 12”, 6”, 2”, 1 1/2“
Pre-Shrink ID: .30”, .40”, .50”, .75”, .80”, 1.1”, 1.5”, 2.0”, 3.0”, 4.5”, 6.0”, 7.0” |
